Compound Steel Bar Gratings
1. Compound Steel Bar Gratings Introduction
Compound steel grating is a product made of steel grating with certain crossing and checkered plate with seal
surface in different thicknesses. The grating type G323/40/100, G253/30/100 and G323/60/100 are generally
used as base support materials. The checkered plate galvanized or hot dipped with 3mm thickness is used as surface plate.
Checkered plate is used as riffled plates with thickness of 4mm, 5mm or 6mm according to customer's requirements.
Compound steel grating will generate buckling deformation due to thermal stress after hot dip galvanizing, and larger steel grating has difficult levelling, so please note type selection.
2.Steel bar grating specification:
Material: Mid steel Q235(Low carbon steel), stainless 201,304,316
Bearing bar size: 20*3mm; 25*3mm; 30*3mm; 30*5mm; 40*5mm; or as your requirement
Besring bar spacing: 15mm; 25mm; 30mm; 40mm; 50mm; 60mm; 90mm; or as your requiement.
Cross bar spacing: 24--200mm; or as your requirement.
Surface treatment: hot dipped galvanized; paint; untreat
Steel bar grating Standard:
America ANSI/NAAMM (MBG531-88)
Steel Standard: China GB700-88 / ASTM (A36) / BS4306 (43A)
Hot Dip Galvanizing Standard: China GB/T13912-92 / ASTM (A123) / BS729
4. Our Service:
We can design the shop drawings according to custiomer's structural drawings.
We can provide samples if you need.
We can offer customized service as customer's per requirements.